Smooth continuous edges
Cut edges come off clean, with no top-side material marking — so the part is ready for the next operation instead of the deburring bench.
Equipment & materials
Geared for your fabrication needs.
A state-of-the-art 4000-watt Amada Gemini laser, a 10′ HFE high-precision press brake, an autofeed pemserter, welder, saw, drill press and other fabrication tooling — coupled with CAD/CAM software and over forty years of experience.
4000 watt · 5′ × 10′ bed
Amada Gemini Laser
The center of the shop. State-of-the-art 4000-watt cutting on a bed big enough for the largest of parts, producing an endless variety of high-quality custom parts — each with smooth continuous edges and no top-side material marking.
- Cuts thin plastic through 3/8″ stainless and 3/4″ carbon steel
- Stainless, brass, aluminum, plastic and hardened materials
- Works pre-formed and pre-fabricated parts, not just flat sheet
10′ · Amada CNC controls
HFE High-Precision Press Brake
Once parts are cut they are shaped on the 10′ HFE. Combined with Amada’s advanced CNC controls it offers quick set-up even for multi-stage bending.
- Compact hydraulic system with high-speed ram movement
- Very high degree of ram repeatability
- Superior bend accuracy across the run
Self-clinching hardware
Autofeed Pemserter
Pressed-in studs, standoffs and nuts installed as part of the job, so panels and enclosures arrive with their hardware already in place.
Mig · Tig · Cut · Drill
Welding, Saw & Drill Press
The supporting bench that turns cut and formed parts into finished assemblies — welder, saw, drill press and other fabrication tooling.
Programming & digital setups
CAD/CAM Software
High-speed equipment coupled with CAD/CAM software is what makes fast turnaround possible. New designs as well as modifications can be programmed into the system — and Adtek can create the file from just your existing part.
- Setup information saved as electronic digital files
- Repeat parts produced accurately, any time you need them
- Modifications programmed without starting over
What goes on the bed
Materials & capacity.
The Gemini will cut anything from thin plastic up to 3/8″ stainless steel and 3/4″ carbon steel. Products can be processed out of stainless steel, brass, aluminum, plastic and more — including hardened materials and pre-formed or pre-fabricated parts.
Each part comes off with smooth continuous edges and no top-side material marking.
Quote your material| Material | Capacity |
|---|---|
| Carbon steelThickest capacity on the laser — plate, brackets, frames and base plates. | up to 3/4″ |
| Stainless steelEnclosures, panels and covers that must resist corrosion or be washed down. | up to 3/8″ |
| AluminumLight chassis, panels and covers where weight matters. | Quoted to your part |
| BrassTrim, plates and detail parts. | Quoted to your part |
| PlasticGuards, windows, spacers and templates. | From thin sheet |
| Hardened materialsWear parts that would eat a punch or a saw blade. | Quoted to your part |
| Pre-formed & pre-fabricated partsBring us a part that already exists — the laser can work on it. | Quoted to your part |
Thicknesses shown are the published cutting capacity of the laser. Anything marked “quoted to your part” depends on the geometry — send the drawing and we will tell you.
Finish & repeatability
The part you get back.
Superior bend accuracy
The HFE’s compact hydraulic system gives high-speed ram movement while maintaining a very high degree of ram repeatability.
Repeat parts from file
Setup information for both machines is saved as electronic digital files and used to quickly produce accurate repeat parts any time you need them.
We can make the file
New designs as well as modifications get programmed into the system — and the file can be created from just your existing part.
Photography on this page is illustrative of the equipment and processes described, not photographs of Adtek’s own machines.
Have a material and a thickness in mind?
Send the drawing and the quantity — we’ll tell you what it takes to make it.