(209) 634-0300 Request a Quote
A CNC fiber laser cutting head cutting a steel sheet, sparks fanning out beneath the nozzle

Turlock, California · Central Valley

Your one-stop job shop for metal fabrication.

We cut thicker materials than the competition with our lasers, accommodate the largest of parts on our 5′ × 10′ bed, and hold some of the tightest tolerances in the industry — backed by over forty years of experience.

Request a Quote (209) 634-0300
  • Precision laser cutting
  • Forming
  • Mig & Tig welding
  • Light structural fabrication
4000 W Amada Gemini laser
5′ × 10′ Laser bed capacity
3/4″ Carbon steel cut
10′ HFE press brake
40+ Years of experience

Capabilities

Cut, formed, welded and assembled — under one roof.

High-speed equipment and CAD/CAM software make fast turnaround possible on every project. Here is the full list of what the shop does.

Precision Laser Cutting

A 4000-watt Amada Gemini laser on a 5′ × 10′ bed — the machine the whole shop is built around.

Details

Precision Forming

A 10′ HFE high-precision press brake with Amada CNC controls turns flat blanks into finished parts.

Details

CNC Turret Punching

High hole counts and repeated features driven across a full sheet.

Details

Mig Welding

Fast, strong structural welds for frames, decks, guards and heavier assemblies.

Details

Tig Welding

Clean, controlled welds where the joint has to look as good as it holds.

Details

Saw Cutting

Bar, tube and structural stock cut to length before it ever reaches the bench.

Details

Light Structural Fabrication

Cut, formed and welded parts assembled into the finished thing you actually ordered.

Details

Not sure which process you need?

Send the drawing — or the part itself. Adtek is anxious to quote or look at any project you have available.

Request a Quote

Materials & capacity

Cut thicker. Hold tighter.

The 4000-watt Amada Gemini laser will cut anything from thin plastic up to 3/8″ stainless steel and 3/4″ carbon steel — and it does not stop at flat sheet. Hardened materials, pre-formed and pre-fabricated parts all go on the bed.

Every part comes off with smooth continuous edges and no top-side material marking.

See the equipment
Materials Adtek cuts and the published capacity for each
MaterialCapacity
Carbon steelThickest capacity on the laser — plate, brackets, frames and base plates. up to 3/4″
Stainless steelEnclosures, panels and covers that must resist corrosion or be washed down. up to 3/8″
AluminumLight chassis, panels and covers where weight matters. Quoted to your part
BrassTrim, plates and detail parts. Quoted to your part
PlasticGuards, windows, spacers and templates. From thin sheet
Hardened materialsWear parts that would eat a punch or a saw blade. Quoted to your part
Pre-formed & pre-fabricated partsBring us a part that already exists — the laser can work on it. Quoted to your part

All job shop needs

What comes off the floor.

The fourteen kinds of work this job shop is set up for — from a single bracket to a full welded assembly with the hardware already pressed in.

See all work
  • Assemblies
  • Brackets
  • Cabinets
  • Chassis
  • Control Consoles
  • Conveyor Frames
  • Custom Parts
  • Decks
  • Electronic Enclosures
  • Frames
  • Guards
  • Hand Rails
  • Platforms
  • Perforated Screens
A set of laser-cut and formed steel parts — brackets, gussets, a perforated panel — laid out on a steel bench
Brackets, gussets, panels and formed channel — the everyday output of a laser-and-brake shop.
A finished sheet-metal electrical enclosure with a hinged door and a louvered vent panel
Enclosures and consoles: punched, formed, welded, hardware pressed in.

Photography on this page is illustrative of the processes described, not photographs of Adtek’s own shop floor.

The equipment

Two machines do most of the talking.

Adtek is geared for your fabrication needs — state-of-the-art equipment coupled with CAD/CAM software and over forty years of experience.

4000 watt · 5′ × 10′ bed

Amada Gemini Laser

The center of the shop. State-of-the-art 4000-watt cutting on a bed big enough for the largest of parts, producing an endless variety of high-quality custom parts — each with smooth continuous edges and no top-side material marking.

  • Cuts thin plastic through 3/8″ stainless and 3/4″ carbon steel
  • Stainless, brass, aluminum, plastic and hardened materials
  • Works pre-formed and pre-fabricated parts, not just flat sheet
10′ · Amada CNC controls

HFE High-Precision Press Brake

Once parts are cut they are shaped on the 10′ HFE. Combined with Amada’s advanced CNC controls it offers quick set-up even for multi-stage bending.

  • Compact hydraulic system with high-speed ram movement
  • Very high degree of ram repeatability
  • Superior bend accuracy across the run
Full equipment & materials list
A dark monitor showing a glowing blue wireframe nest of sheet-metal part outlines

CAD/CAM & repeat parts

No drawing? Bring us the part.

New designs as well as modifications can be programmed into the system — and Adtek can create the file from just your existing part. Nothing needs to start over.

Setup information for both the Gemini laser and the HFE press brake is saved as electronic digital files, so accurate repeat parts can be produced quickly any time you need them.

  • Reorders run from the saved setup, not from scratch
  • Modifications programmed in without a new tool-up
  • Quick set-up even for multi-stage bending

About Adtek, Inc.

Quality and service — the continuing goals.

Located in California’s Central Valley, Adtek, Inc. is a company committed to quality steel fabrications and precision laser cutting. Our high-speed equipment and CAD/CAM software facilitate fast turnaround times on all our projects for you.

We encourage you to give us a try and see for yourself the amazing capabilities offered by our equipment. Combine this with quick turnaround and friendly staff dedicated to your satisfaction, and your search for an outsourcing specialist is over.

President Tom Ady
VP of Operations Ken Spence
“Quality work and quick turnaround.”
Michael David · Google review
A clean steel fabrication shop floor in morning light, with a CNC laser, press brake and racked sheet stock
1460 Ellerd Drive Turlock, CA 95380

Request a quote

Tell us what you need made.

One part or a production run — we are anxious to quote or look at any project you may have available. Fill this in and we will come back to you.

  • Quotes on one-offs, prototypes and repeat production
  • Drawings, DXF and STEP files welcome — or send the part
  • Prefer to talk it through? (209) 634-0300

Drawings can be emailed straight to kspence@adtekusa.com, or call (209) 634-0300.

Your email address will be used solely for the purpose of responding to your questions and will never be sold or reused in any other way.

Send us the drawing. We’ll send back a quote.

Adtek is anxious to quote or look at any project you have available — one part or a production run.

Request a Quote (209) 634-0300
Call (209) 634-0300